<iframe src="//www.googletagmanager.com/ns.html?id=GTM-MXV94Z" height="0" width="0" style="display:none;visibility:hidden">
headingBgBlog.png
bannerLineBg.jpg

Hynes Blog

Rob Touzalin

Recent Posts

Metal Fabrication Tips for a Better Yield at a Lower Cost

by Rob Touzalin on October 25, 2016

With any new metal fabrication project comes plenty of planning, challenges, critical decisions and efficiencies to strive for.

Before you budget your next fabrication project, it’s important that you have a full grasp on the different manufacturing factors to consider, and how you can optimize each step of the process for cost reduction, timeliness and efficacy.

To help narrow down the field of many, we’ve listed the four main factors of your metal manufacturing project and tips to optimize each:

Continue Reading

Roll Forming or Stamping: 5 Factors To Drive Your Metal Sourcing Decision

by Rob Touzalin on October 11, 2016

To roll or to stamp—that is the question.

Your mission is to source a high quality, custom steel part to be manufactured efficiently at a relatively low cost.

As you well know, there are a variety of different metal forming techniques when sourcing a new project. But how do you choose between two popular methods, roll forming and stamping?

How you will manufacture your custom steel part is an important decision that requires you weigh and prioritize a variety of factors.

To help, we’ve listed five main factors to consider when making your metal sourcing decision: 

Continue Reading

Manufacturing Engineering: How to Reduce Design Complexity

by Rob Touzalin on August 30, 2016

“Simple can be harder than complex: You have to work hard to get your thinking clean to make it simple. But it's worth it in the end because once you get there, you can move mountains.”

- Steve Jobs

In some iteration or another, you’ve heard of the KISS principle: Keep It Simple, Stupid.

The KISS principle was developed in the mid-1900s by Clarence “Kelly” Johnson, a former Lockheed Martin advanced aircraft development engineer, who believed that systems performed best when they had simple designs rather than complex ones.

Maybe Mr. Johnson was onto something. Many years later, the KISS principle is still used by manufacturing engineers and software designers, where the threat of scope creep can make projects unmanageable over time.

Image Credit: Brennan via Flickr

There are many different factors that can affect your part or product design, including cost, material, project scope and time to market. Below are three rules based in simplicity to help manufacturing engineers reduce design complexity.

Continue Reading